On a Wednesday evening, a major fire broke out in a private pipe company in the SIDCO industrial estate in Usilampatti, Tamil Nadu. As per the information shared by an official from the fire and rescue services department, the potential cause of the fire was an electric short-circuit.

Though no human lives were lost, goods worth lakhs were destroyed. Electrical faults are common causes that initiate fire in multiple scenarios.

But can such lapses be avoided in the future? Let us take a look.

Such mishaps may have multiple effects on the people. It jeopardizes one’s health and can be psychologically and physically taxing. It also results in financial discrepancies due to the monetary loss, leading to business interruption or even bankruptcy.

Thus, precaution is mandatory to avoid such unforeseen mishaps everywhere. All places with electricity supply, like workplaces, houses, hospitals, institutions, shops, etc., must have a reliable fire alarm and detection system installed there. As observed in the case of Usilampatti, a minor distraction caused a series of disturbing events and loss, which could have been prevented with a few precautionary measures.

VNT believes in a transformational approach to satisfy consumer needs. The company manufactures fire suppression and detection products, ensuring power quality and fire safety.

Stat-X^TM : A Solution

The Stat-X Fire Suppression System^TM is a worthy alternative for other traditional products from the same domain in the market. It is compact, light, and durable, and requires 90% less weight and space than alternative suppression systems. It excels in quality and reliability on various levels; its advantages are as follows:

1. Effective agent performance.
2. Rugged stainless-steel construction.
3. Virtually maintenance-free, easy to install, and 10+ year service life.
4. Easy replacement, no recharging or refilling.
5. Reduced downtime for mining operations.
6. Environmentally friendly – zero Global Warming Potential and zero Ozone Depletion Potential.

Fire break-outs risk is common in areas with poor safety equipment installation. Stat-X^TM units are capable of protecting all high fire-risk component areas. It is critical to choose precautionary products wisely to avoid disasters.

Especially when talking about electric short-circuits, there are severe chances of fire spreading considerably and resulting in significant destruction.

Precautions against such risks are a must!

This case study of Usilampatti provides a testament to the same. Many fire mishaps can be avoided in the future with proper technical supervision and assistance. Our safety depends entirely on our actions and preferences.

Fire break-outs also affect the environment simultaneously, and the fumes and smoke released become poisonous to the living beings who inhale it. As responsible humans, it is necessary to take every measure to prevent such disturbing and hazardous accidents.

For further information, please visit us online at: https://vnt.in/.

Website: https://vnt.in/
Email: info@vnt.in

In addition to air, food, and water, the Internet has also become a necessity in our lives. Not only is it difficult to survive without the Internet, but it is also actually impossible to get many tasks done without it.

With the ongoing advancements, 5G technology is emerging as a star in the telecom sector. But it is up to us to analyze its traits and make the most out of it. Let us discuss this technology more through this article.

How Does 5G Technology Benefit the Market?

5G enables the users to work remotely from any part of the world with an uninterrupted network and minimal complications. It renders a smooth and high-speed internet connection while simultaneously aiding the country’s resources.

Multiple companies, business owners, and educational institutions have stepped into the market in the past couple of years. Telecom solutions have contributed to refining and raising the growth of all these entities. Many of them, who did not exist then, have emerged as business leaders today.

5G Technology has benefited all the users on certain levels, such as:

1. Strengthen the foundation of Digital India: With the extensive use of 4G technology in the past decade, it is estimated that 5G technology will positively impact the telecom industry with a notable growth rate.

The Smart Cities and Smart Village missions, Make in India project, Start-Up India programs, etc., will highly benefit from this technology. It will direct the country’s future to new horizons of success.

2. Better connectivity: 5G technology will make your working experience immaculate because of its high speed and connectivity.

4G technology has undoubtedly reduced the isolation of remote areas, but a wide gap has to be covered to develop India uniformly. 5G technology will help in bridging this gap to a considerable extent.

3. Improves accessibility: 5G technology will also ease the accessibility of resources. Industries like healthcare, banking, entertainment, etc., allow people to minimize their efforts and perform essential tasks within a few clicks with more accuracy.

It will help in escalating the quality of life and save time.

What is India’s take on 5G Technology in Telecom?

The telecom sector plays a prominent role in the economic progress of industries worldwide. It primarily assists and navigates the new emerging industries and sectors in building and expanding their connectivity. Despite being a rapidly developing country, India is the world’s second-largest telecommunications market and has a subscriber base of 1.16 billion.

Especially the Covid-19 pandemic made people familiar with the concept of telecommunication networking. Due to the global lockdown, everyone switched to the online mode of working, teaching, learning, etc. In this period, around 35% of India’s GDP was enabled by the telecom sector, with a direct contribution of 6%.

Given the current scenario, the Government of Telecommunications has recently granted permission to the private telecom companies to start with the trials of 5G technology and its applications in different industries. With the rapidly growing internet usage, it is necessary to switch to such networks that can handle the enormous internet traffic smoothly. 4G technology will become obsolete in another decade due to the multiplying internet usage statistics.

Detangling the Delusion with VNT!

Telecom sector and 5G technology combined hold power to transform the world, let alone a country. The contemporary Indian telecom sector is pushing its boundaries to build a safe and progressive future.

VNT has always provided its customers with trustworthy solutions from every domain. We have developed a vast range of telecom solutions, including Smart Cell Solutions, that do justice to this technology and its users. Utilization of the 5G technology will enhance our product functioning and enable a flawless user experience.

The assertion that “the Internet is harming the more youthful minds” is only a myth. The Internet is a distinctive feature for humankind if used well. It is now time for us to broaden our perspective and explore a brighter outlook.

The introduction of 5G technology will help uplift society on a massive scale. If you ask, “How?” then to list a few advantages, the Internet facilitates quality education, flexible mode of working, connectivity in remote locations, etc. But the argument does not end here!

The Internet is a whole ocean of ideas, technologies, and opportunities yet to be explored. However, the point is, are you willing to mold yourself for a better experience or are you fine with the obsolete options you already tried (which probably did not work out)?Contact us to learn more about our solutions for your business and projects.

Incorporated in 2003 with a vision of simplifying efficient energy solutions, VNT today is a dominant force in a wide range of industries, including telecommunications, solar, power, defence, and railways, among others.

Our company has become a reliable partner for businesses in the power management, asset conservation, and fire safety verticals through strategic business operations and a customer-centric perspective.

A humble beginning, with a mighty ambition!

Our enthusiasm for leveraging innovative technologies has bolstered us in spearheading the delivery of solutions by harnessing technological advancement. We are committed to increasing business utility by anticipating your present needs and planning future business strategies.

We deliver unparalleled solutions in their scope of expandability to cater to the ever-challenging needs of the critical sectors we support, with safety and quality control as our highest priorities. Our integrity and willingness to serve underpin our holistic approach to addressing critical priorities and developing comprehensive strategies.

Making strides every day

Aside from the gratification of serving pivotal sectors that drive the country’s economic progress, our fervor for our work stems from constantly evolving by integrating innovative strategies to make every function of our operation reliable, safe and sustainable.

Having established our competency and market dominance in the Indian market, we have set our sights to mark the world’s length and breadth to assist businesses in meeting the growing demands in the photovoltaic sector in the international solar market.

Establishing Valuable Collaboration with Industry Visionaries

Our company’s success is the culmination of our partnership with DEHN SE + Co KG. and Fireaway Inc., pioneers in their respective lightning protection and fire safety fields. Through this affiliation, we have tremendously strengthened the underpinning of our services and solutions.

Our services and solutions abide not only by national standards but also by international conventions. All of our processes and procedures are TUV certified from Germany and have raised the bar for our industry’s standards. Our national certifications, such as ISO 9001, ISO 14001, and ISO 45001, further validate the authenticity of our services.

The road ahead to sustainability:

Integral to all our inventions and procedures is our dictum- “Making the world cleaner, greener and protected.”

Our decade-long experience has taught us that energy efficiency and conservation are critical components of achieving sustainability. It is both our moral responsibility and social obligation to contribute to climate change mitigation through our solutions that propagate energy efficiency, reduce greenhouse gas emissions and facilitate the conservation of fossil fuels.

We possess the spirit of an innovator and the capability of a provider. We are constantly on the lookout for ways to improve the overall efficiency of our energy-saving products. We gear all our innovation and R&D efforts towards stewarding sustainability through better engineering. From our efficient telecom solutions that save businesses considerable costs to our solar solutions that aid in quality power management to our eco-friendly fire suppression systems, we put our knowledge to action by enhancing our product portfolio and solution capacity.

All of our endeavors are concerned with safeguarding the interests of our stakeholders, including our employees, customers, policymakers, and the environment in which our businesses operate.

Taking Actions that leave lasting impressions:

We are ardent believers in broadening the breadth of the deep knowledge that we have accumulated by sharing it with other enthusiasts in our field to create future leaders.

As part of our effort to instill thought leadership, we participate in various events, exhibitions, and other gatherings where we share our viewpoints about the latest fire and industrial safety trends, power management, automation technologies, and more.

Industrial services that pave the way

In our field of work, unanticipated hazards are always a source of concern for businesses, whether a stand-alone unit or a utility-scale project, causing downtime and business interruption and frequently resulting in massive financial setbacks.

Our industrial services place a high value on comprehensive Earthing Audits, Electrical Health Safety Audits, Energy Audits, etc. Our thorough and detailed services – ranging from visual inspections to comprehensive risk consultancy – assist businesses worldwide in mitigating the impact of such hazards.

VNT- One big family

We strive to empower, nurture and reward our employees through continuous skill enhancement in a healthy work culture that celebrates a safe and growing path, excellent collaborations, new opportunities, diversity, and inclusion for all.

Our technical experts and certified professionals are dedicated to meeting the highest stakeholder standards, which serve as the foundation of our competency and market dominance. Our longevity and success can be attributed to our talented and dedicated workforce, who run the company on the principles of responsiveness, teamwork, and unwavering customer service.

My team’s determination and our leadership’s resolve to achieve excellence in unison has propelled VNT to unprecedented heights, and we will continue to soar.

In the first six months of 2021, Delhi Fire Service responded to over 13,700 calls, out of which 8,700 were fire incidents. This alarming statistic reflects a lack of awareness regarding fire suppression systems and an effective fire safety plan. Every successful fire protection plan includes an efficient fire suppression system. This article enlists what a fire suppression system is, its working and the various kinds of fire suppression systems available in the market.  

Fire Suppression System: Investment that Guarantees Enhanced Safety 

Fire Safety Planning prevents fire by controlling fire hazards in the building, ensures operation of fire protection systems through maintenance procedures, and provides a systematic method of safe evacuation from the building in the event of a fire. A fire suppression system is a crucial part of any fire safety plan. 

Every business and residential association must ensure the safety of human and physical assets, especially in fire hazards. An ideal fire suppression system should curb fire accidents at their site of origin without any human interference. Today’s advanced fire suppression systems can detect flames, sound an evacuation alarm and douse fire simultaneously. 

Moving on to the installation side, the fire protection device installed in an industry that manufactures electrical equipment is different from the fire protection device installed at a movie theatre. The point is, based on the area of application, the fire protection devices vary. To comprehend their mechanism and determine which fire suppression system is best for you, it is beneficial to understand more about them.

What goes in a Fire Suppression System?

Have you seen a fire suppression system installed at a facility? There is a lot of chemistry involved in the functioning of a fire suppression system. 

Fire is a result of a combustion reaction between the reactants – oxygen and fuel. The term ‘fuel’ here refers to a burning substance, which is a hydrocarbon in general. What a fire suppressing agent does is, it simply cuts the supply of oxygen from the burning fuel.

The suppressing agents per various classes of fire and how one can plan the installation of fire suppression devices at any facility differ according to the needs and usage. There are different types of suppressing agents for different classes of fire as per the “National Fire Protection Association” (NFPA) standards.

Classification of Fire as per NFPA standards:

The usage of suppressing agents is highly dependent on the Class of Fire and improper use of suppressing agents may lead to severe consequences. 

Let us take a look at the types of Fire Suppressing Agents:

• The Generic Fire Suppression Agents – Water and Foam:

Water and Foam are the most common fire extinguishers which are readily available to us. Although water can extinguish the fire by hindering the combustion reaction between fuel and oxygen, it is highly recommended for Class A fires. Using water against class B leads to the spreading of the flammable liquid and their usage in class C could create an electric shock due to its ability to conduct electricity.

Foam Extinguishers can be used for both Class A & Class B fires. The strong cohesive qualities of foam make it capable of clinging to the surfaces, cools the hot surfaces by its water retention ability, seals the surface of the liquid, forms an air excluding blanket which prevents the flammable vapour from interacting with oxygen present in the air.

• Aerosol-Based Fire Suppression:

Condensed aerosol is another new class of extinguishing medium which consists of ultra-fine solid particles – generally less than 10 microns in size. This extinguishing agent is generated by a self-contained exothermic reaction and is proven to be ten times more effective than gaseous extinguishers.

The stable molecules are responsible for fire suppression. These stable molecules are formed as a result of the reaction between the aerosol and the flames. Moreover, they remain suspended in the air for a prolonged duration of up to 1 hour – thus making it one of the most effective fire extinguishing agents.

For example, Aerosols that contain potassium which possesses highly extinguishing characteristics, forms Potassium Hydroxide, Potassium Hydride, Water Vapor, and Potassium Oxide upon reacting with hot flames.

• Carbon Dioxide Fire Extinguishers:

Gases like Carbon Dioxide, Argon, Nitrogen, and other inert gases are particularly useful in flame suppression when water, foam, and powder suppressing agents are ineffective against the flames. 

Unlike a foam extinguisher that leaves residue after the combat with flames, CO₂ extinguishers do not leave any residue. Suitable for both Class B and C fire, Carbon Dioxide Fire Extinguishers suppress the fire with an intense cold discharge. Thus, they take away oxygen from the flame and remove the heat. The gaseous fire suppression system is both cost-effective and easy for clean-up.

• Dry Powder and Dry Chemical-based Fire Suppressing Agents:

Powder-based suppressing agents are effective only against class D fires or combustible metal fires. Made of granular particles, this fire suppressing agent includes Copper, Sodium Chloride and Graphite as constituents in the mixture.

On the other hand, a Dry Chemical-based suppressing agent is a mixture of additives and tiny particles of metal-bicarbonates (Sodium Bicarbonate/Potassium Bicarbonate) or Ammonium Phosphate. However, the usage of metal bicarbonate suppressing agent phosphate is quite suitable for extinguishing the flames of Class B & C. Similarly, the use of Ammonium Phosphate is applicable against the fire of classes A, B, and C. 

• Wet Chemical Extinguishers:

This suppressing agent is highly effective against the class K and class A fires. The Wet Chemical Extinguisher is a mixture of water and additives, which chemically react with fats in cooking oil. The constituents of wet chemicals react with the flames to create a thick, soapy barrier between oxygen and the supporting fuel. The quick flame knock-down ability as that of Dry Powder and Foam cuts off the oxygen supply and extinguishes the fire with a heat-resistant blanket.

Fire Safety Preparedness: Where Do We Stand Now?

It is prudent to use the most advanced fire detection methods and suppression in this day and age. Traditional hazard fire protection systems necessitate costly installation, frequent maintenance, piping space, weight-bearing fixtures, and numerous other modifications. Fire suppression systems should be cost-effective, easy to maintain, and quick to respond.

Classification of fire suppressing agents per various classes of fire and how one can plan the installation of protection devices at any facility is quite essential. But it is recommended that high-rise residential complexes, commercial buildings, and enterprises install a fire suppression system that works on different classes of fire – providing safety in all scenarios. VNT’s Stat-X Aerosol technology is an effective fire suppression solution designed to address traditional solutions’ shortcomings.

VNT’s Approach to Fire Safety Solutions

It is critical to invest in appropriate fire safety systems to avoid unnecessary costs and risks to a company’s assets. Successful fire suppression is a complex task that necessitates a diverse set of products, systems, and expertise. VNT has provided industry-leading fire safety solutions to large-scale projects and established clientele in collaboration with Fireaway Inc. as a technical and business partner (with the latter leading the international market with its development of the Stat-X Condensed Aerosol Fire Suppression System). All of our fire safety solutions are in accordance with international standards such as NFPA 2010 and UL 2775, and they play a vital role in protecting facilities and individuals from fire hazards.If you would like to see for yourself how VNT India can help you simplify support and put customers first, write to us.

Power has become the most crucial element required for the functioning of an economy since the Industrial Revolution. Different industry sectors are heavily dependent on energy, from domestic to agricultural and to service and governmental operations. The importance of power continuity for a business puts strain on the reliability of power equipment. Hence, the power quality of the systems is of utmost importance to minimize any source of power disturbances. 

As per the IBF reports, India ranks second globally in power consumption. With a rapid surge in energy demand, the power facilities must undergo proper maintenance and regular audits to promote efficiency. Additionally, early detection of faults can help in preventing outages and improve the productivity of plant equipment and assets. This article will address the causes of power quality disruption and how businesses can prevent it. 

Power Quality Monitoring to Boost Equipment Reliability

Electric parameters are prone to fluctuations due to unbalanced load, the occurrence of faults, and other external factors. Power quality issues affect the entire electrical system, including the equipment, plants & installations, and electricity distributors. 

The continuity, efficiency, and safety of organizations’ equipment depend on maintenance. While we cannot avoid the deterioration of the power quality, analysis and detection can surely aid in maintaining the equipment’s performance. 

Power quality monitoring significantly improves equipment reliability and infrastructure support through better management of electricity distribution. Furthermore, thermographic testing of the equipment utilizes infrared energy to inspect various electrical components for defects, regardless of disturbances such as voltage sags/drops, harmonic distortions, imbalances, complete breaks, power quality analysis diagnoses these inadequacies. 

However, one must ensure to take thermography testing along with power quality analysis. Infrared inspection, commonly called thermographic testing, is a non-destructive predictive maintenance method. Besides power quality, it detects connection defects, overloads, deteriorated insulation, and other potential problems in electrical components.

Some of the major purposes of power quality analysis and thermography testing are:

1. Downtime Reduction: Considering equipment failure and outages, businesses need to check the power source. Therefore, a power quality audit helps detect potential problems, implement corrective actions, and avoid facility downtime. 

2. Cost-Effective: Poor voltage, power imbalances, and fluctuations often lead to unwanted disruptions for electronically controlled equipment. This, in turn, deranges the valuable assets and precision of an organization and creates a real-time loss.

3. Business Safety: In a condition of improper power supply to machines and equipment, they run the risk of overheating. Besides, when machines overheat, their breakdown can cause significant damage to property and people. Thermography testing is an effective solution to measure surface temperatures and reduce the possibility of overheating. 

4. Drives Potential: Prolonged interruption of power reduces productivity and hence, the output, which places a heavier drain on the power source. If we do not check it timely, it causes energy wastage along with the halt. Predictive maintenance services such as a power quality audit and thermography allow the address of such problems.

5. Lowers Electricity Bills: Be it a sag, dip, or power outage, these fail to meet the efficient power factor that directly impacts billing. Essentially, thermography testing spots such areas of loose or corroded connections that cause increased resistance in the circuit. Consequently, power quality analysis provides practical measures to mitigate the risks.

The National Fire Protection Association (NFPA) approximates the fire hazards in facilities due to electrical failures to be around ten percent. Several power quality issues include data errors, overheating, excess power usage, increased maintenance cost, etc. An audit proves to be proactive at these stages and provides businesses with effective solutions. 

Radical Approach for Industrial Safety

When an electrical system fails to perform as expected, the first step is to identify the cause and implement corrective actions. Power quality is primarily monitored to ensure the stability of electrical power. Furthermore, it investigates an electric device’s ability to function appropriately in the presence of a distributed amount of energy. Poor power quality can cause unstable equipment operation, complete failure, shorter lifespan, supply interruption, and plant downtime.

Therefore, thermography testing and power quality audit provide temporary monitoring of electrical appliances in a detailed procedure that includes:

1. Analyzing power equipment: The first step to framing a feasible solution for systems is to determine the area of unfamiliarity. We can derive conclusions from the equipment whether the faults are ongoing or recurring, and this analysis helps obtain baseline data for today and future purposes.

2. Data Interpretation: Before taking initial quality measurements, it is necessary to inspect the environment of power equipment. The first step is to measure and interpret the magnitude of voltage fluctuations, harmonic disruptions, and duration of changes. It culminates the severity and locates distribution systems that one must monitor for imbalance.

3. Power Quality Verification: While the auditors analyze the data, thermographic testing enables the detection of corroded connections deteriorated insulations, which are then replaced. Hence, modifying the power system or installing equipment within the business premises.

4. Securing through Dry-run: Given the corrective measures, the auditor conducts a dry run and monitors voltage in the meter. Furthermore, businesses must ensure all wiring is secure and not exposed to moving parts or high heat sources. Once everything is safe and secured, the equipment is equipped in a cabinet. 

A critical step in solving power quality issues is learning how to measure electrical parameters associated with the proper operation of equipment.

The utility model of electricity, i.e., Power Quality Analyzer, is a device that gathers and analyzes electricity measurement data into useful information. The most commonly used devices for deriving data and troubleshooting are Analyzers. The data derived from existing electrical infrastructure provides clear feedback on the system and its areas for improvement. This information helps in identifying upgrades and changes within a facility. 

We observe the data through voltage recorders and in-plant power monitors to record periodic waveforms and voltage spikes or dips. Businesses can further share the following information with other utility providers to analyze regional grid issues and with operations personnel responsible for maintaining power quality.

Thermography Test & Root Cause Analysis with VNT

Thermographic testing and power quality analysis are complex processes involving exposure to live electrical components. Therefore, it is crucial to seek trained consultants who have undergone specialized training in conducting thermography and power quality.

 VNT provides technical solutions primarily in power inspection and energy management. We offer varying levels of power quality to meet the needs of different customers. Electrical systems are prone to unexpected failure; however, a noticeable increase in heat in various parts precedes equipment failure. We identify such precedents and ensure the safety of your business and its equipment through thermography testing.

We specialize in evaluating, auditing, and addressing a wide range of power quality issues to increase plant, motor, and equipment efficiencies. Our trained professionals handle the whole spectrum of power quality, from technical audits to on-site industrial energy audits. We thoroughly analyze the power system to comply with the standard regulations IEEE Std.1159 and IEC 61000 – 4 – 30. We ensure the sensitive equipment’s reliability, safety, and simplicity of operations. 

With VNT’s audit and thermography test, you can seek electrical maintenance services and the improved lifespan of your existing equipment. Moreover, we provide businesses with a sound system that improves power-generating equipment’s performance, efficiency, and longevity. Our services limit the disturbances to the power distribution system and thereby ensure safety, risk reduction, maximize productivity, and reduce delay costs. 
If you want to optimize the service life of your business equipment and troubleshoot power quality issues, contact us. 

Today, Switch-Mode Power Supply Systems find wide usage in nearly all electronic devices – from home computers to state-of-the-art industrial machinery and equipment. SMPS technology was first introduced in the late 1990s, and it quickly became the most successful technique for supplying DC power to electronic equipment. Known primarily for its small size and high efficiency, SMPS contains all the necessary properties that make it a must-have for all industrial sectors, from Machine Tool industries, Process & Control Monitoring to Security Systems. Due to its competence, SMPS is used to provide an efficient and effective power source.

This article covers various aspects of SMPS, including its working, usage and functionality.

What is a Switch-Mode Power Supply?

A Switch Mode Power Supply is an electronic power supply that utilizes a switching regulator to convert electrical power efficiently and safely. Like conventional Power Supplies, SMPS transfers power from an AC or DC source to a DC load, while converting voltage and current characteristics. 

“Power Supply” refers to a device that generates source power and is connected to the mains or another external supply. In simple words, it’s a complete power supply. Switch Mode Power Supply does not use linear transforms; instead, it switches power at a high frequency and then steps down the voltage.

The basic principle behind a Switch-Mode Power Supply is that it utilizes a switching regulator to regulate the voltage. It employs a series switching element to turn on and off the current supply to a smoothing capacitor. The voltage on the capacitor determines how long the series element is turned on. If it is greater than the required value, the series switching element is turned off; if it is less than the required value, it is turned on. The voltage on the smoothing or reservoir capacitor is thus kept at the required level.

Need For SMPS in Advanced Industries

In an industry, multiple types of machinery are at work at the same time. Unlike the past, wherein machines and equipment were operated manually, the operations in today’s automated industries are mechanized and frequently grouped together. The functions performed by these machines can be turned on and off using a computer. Some of these machines may require different voltages to operate effectively. Machinery and Equipment that operate in varying voltages might be needed to be integrated to work simultaneously. A DC power supply source is required in diverse voltages to deploy this system proficiently. This results in large-scale use of Switch-Mode Power Supply in modern industries.

A DC power source powers almost all electronic and electrical devices in the control panel; the utility supply is AC. SMPS is used for converting AC To DC. Traditionally, Linear Mode Power Supplies have been used to convert AC mains to DC power. They used linear transformers to reduce the voltage. This generated heat and resulted in power loss. The total magnitude of this power loss results in a significant decrease in efficiency. Another disadvantage of Linear Mode Power Supplies is their bulkiness. Switch-Mode Power Supply is light-weight and portable, thus more convenient to use in industries where efficiency, space-saving and cost-effectiveness have to be achieved. Switch-Mode Power Supplies have replaced the conventional Linear Mode Power supply and created a demand for themselves in the market.

Switch-Mode Power Supplies: One Solution, Multiple Benefits

Since the very beginning, our quality products and innovative solutions have been standing strong while standing out. With a number of innovative engineered customized products, we always provide the perfect solution to represent your business. Our production team is highly competent and believes in innovation, research and constant improvement of our services. In this super-tech age, we completely understand the need for technical advancement and hence, we have indulged in early innovations and engineering skills. And due to this approach, we have carved a position for ourselves across India.

Our Switch Mode Power Supplies are widely utilized due to their small size, light-weight, cost, efficacy, and overall performance advantages.

1. High Efficiency: Due to the “switching action”, the series regulator element is either on or off. Electromagnetic interference is prevented by the electromagnetic filters used in SMPS. Because of its wide output range, SMPS is designed so that the input voltage does not affect the transformer’s performance. Thus, higher levels of efficiency are achieved as very little energy is dissipated as heat when acting as a switch.

2. Compact: It uses advanced semiconductors-thus an SMPS can be made smaller. They make an excellent choice for small control panels. Their high efficiency and low heat dissipation also play a key factor in their small size.

3. Cost-Effective: A SMPS generates less heat compared to linear supplies due to its higher efficiency and switching design- they generate negligible standby power loss.
   
   
4. Flexibility: Switch-mode Power Supply technology provides high-efficiency voltage conversions in voltage step-up (or Boost) or step-down (Buck) applications.
   
   
5. Durability: Industrial power supplies should be able to endure harsh environments and withstand high temperatures. SMPS functions aptly at both high and low temperatures.
   
   
6. Safety: Guaranteed protection against overload, short-circuit and overheating.

Switch-Mode Power Supply: Factors Affecting Performance 

Throughout the article, we inferred the need of replacing Linear Regulators with Switching Mode Power Regulators to maintain high efficiency. SMPS outperforms the traditional Linear Power Supply in efficiency, but care must be taken in certain aspects.

The transient spikes caused by the switching mode is one of the most severe issues. If the spikes aren’t properly filtered, they can spread to all other circuits powered by the same SMPS. They can also cause electromagnetic or radio frequency interference, affecting other nearby electronic equipment.

A SMPS with a poor design can produce a lot of noise and spikes in the output. Ensuring that a SMPS meets its specifications can be difficult; an expert design. Thus, selecting a SMPS from a reputable provider is critical, as simple designs may have a low power factor. The Switch-Mode Power Supply system developed by VNT is the finest choice for any industry. For various telecommunications applications, we render reliable and efficient solutions. Our acquired expertise and highly innovative systems have helped us achieve a leading position in the Telecom Power Switching market. 

VNT – Rendering Industry-Leading Solutions 

We are experts in the field of Energy Conservation, Telecommunications, Power Management, and Safety- rendering essential solutions in a variety of industries. Our highly engineered solutions and customer-centric approach have helped us establish a solid foothold in the Indian market. Contact us to learn more about our services and how they can help you transform your business.

Traditional fire suppression systems necessitate costly installation, frequent maintenance, piping space, and numerous other modifications throughout their shelf life. Another significant limitation was that they required handling by trained professionals. As technology progressed, more sophisticated systems were engineered to address these shortcomings. Additionally, remote working was introduced due to the COVID-19 pandemic, and a need for automated fire detection and suppression systems was created.

Catering to all these needs, the Stat-X aerosol fire suppression system emerged as the most reliable technology as it is automated, practical, adaptable, and cost-effective. Since its inception in 2005, over 500,00 units of Stat-X condensed aerosol fire suppression systems have been sold. But what makes this system more competent than the others? This blog will discuss what Stat-X is, its mechanism, its applications, and why it is prominent in the industry.

What is Stat-X Exactly?

Stat-X is a condensed aerosol-based fire suppression technology that protects against fire hazards in enclosed facilities and local spaces. It is an authorized eco-friendly halon substitute and an alternative to hydrofluorocarbon.

Stat-X is a robust and automated fire suppression product available in various industrial applications for usage in critical sectors worldwide. 

• The non-toxic and non-corrosive nature of the Stat-X fire suppression system is due to its patented design, aerosol composition, and ultra-fine aerosol particles produced. 
• It is entirely environmentally-friendly pre and post usage; it does not deplete the ozone layer. 
• It also has a lower climate impact and a shorter atmospheric lifetime. 

For these reasons, Stat-X has received its due recognition in suppressing fires throughout the world.

How Does Stat-X Aerosol-Based Fire Suppression System Work?

Stat-X is a thermally activated fire suppression system. Upon detecting a fire, it can be activated automatically (or manually) via a releasing device. Upon activation, the unit produces an exceptionally effective, ultra-fine, potassium-based aerosol. Potassium, one of the most effective fire suppression agents available, suppresses fire through a combination of chemical and physical mechanisms, like Halon but without adverse environmental effects. The Stat-X fire suppression system is based on the principle of total flooding of the area- wherein the aerosol agent is uniformly distributed throughout the enclosure to suppress the fire. 

The rate at which aerosols are released has a powerful effect. Micron-sized aerosol particles have gas-like three-dimensional properties, allowing them to quickly disperse the agent to the enclosure’s most buried and protected areas. The interaction between the ultra-fine aerosol particulate and the flame’s free radicals quickly inhibits the fire, restricting it from expanding. Because of the ultrafine particle size of the aerosol (1-2 micron), the surface area interaction between the agent and the fire dramatically increases. The Stat-X particles remain suspended in the enclosure until vented, effectively terminating the spreading of the fire and minimizing the damage. 

Unlike some gaseous agents, aerosol does not decompose in heat or extinguish due to a lack of oxygen. Because the aerosol is suspended in the air of an enclosure for extended periods, it has long post-fire security.

Why Should You Choose Stat-X Fire Suppression System Over Others?

Stat-X fire systems are protecting company assets all over the country due to their quick response time, compact size, low fire extinguishing concentration, and environmental safety. They provide enhanced fire safety in more challenging applications such as telecommunication centres, data processing facilities, flammable liquid storage compounds, and so on.

1. Stat-X aerosol generators, unlike gaseous systems, provide ease of installation since they do not require pressure vessels, piping, or any other expensive installation costs associated with other extinguishing systems.

2. There are no space or weight constraints. As a result, infrastructures with limited space can efficiently adopt this system.

3. Substantially more effective and completely environmentally friendly compared to other gaseous extinguishing agents.

4. Stat-X requires very little maintenance and has a service life of more than ten years. This, combined with their extremely low installation cost, makes them a very cost-effective fire protection solution.

5. Its non-corrosive nature ensures the safety of the facility’s valuable equipment. It does not affect the premises’ electronic equipment or magnetic media.

6. Aerosol particles are suspended in the air after discharge and can be easily and quickly vented out, resulting in minimal post-fire clean-up.

7. Non-toxic in nature- thus, it does not harm the person in close contact and poses no risk due to expellant gas.

8. It does not reduce oxygen levels in the premises. Thus, post-discharge downtown is minimal, and production or industrial activities can be resumed shortly after.

There are numerous fire suppression systems on the market, but the Stat-X condensed aerosol-based fire suppression system outperforms them all. A comparison of some types of fire suppression systems and aerosol fire suppression systems is shown below.

Stat-X: Highly Customizable Solutions for Various Usages in An Industry 

The variety of Stat-X fire suppression solutions available for various use capacities in an industry and their broad field of application are the most valuable aspects. Stat-X technology can be used as a fixed fire suppression system in primary and local applications to combat fires of Categories A, B, C, E, and F. Some class C fires must be treated with caution if there is a risk of explosion due to the presence of gaseous, volatile, or atomized combustible fuels, either before or after flames.

Stat-X is offered in various electrical, thermal and manual units to protect residential and commercial assets.  Due to such flexibility in its range, it is widely sought-after for fire suppression in remote telecom sites, electrical cabinets, machinery spaces, etc.

Safety against Fire is in Your Hands – Literally!

Only a 360° approach to security can mitigate preventable losses when it comes to fire safety. VNT has collaborated as a technical and business partner with Fireaway Inc., which is leading the international market with the development of the Stat-X Condensed Aerosol Fire Suppression System. Our fire safety systems operate in accordance with international standards such as NFPA 2010 and UL 2775, providing 24/7 protection to you and our valuable assets. Our advanced fire safety solutions are meticulously designed to meet all of your expanding safety requirements.
Contact VNT to enquire about how our solutions can better assist you in safeguarding your residential and industrial complex against fire hazards.

India is one of the fastest-growing economies globally, and it has made remarkable strides in furthering its energy sector and economic efficiency. However, its energy demand is projected to increase with time. Therefore, the extent to which India’s energy sector has suffered in recent years with continuous power outages is plainly apparent. As a result, the need for energy conservation gains prime importance. While a fair amount of energy is generated, the domestic power shortage is still a problem due to inefficient equipment, poor design of buildings, and lack of usage consciousness among the people. 

The need for greater energy efficiency leads to more and more companies looking at ways to assess energy efficiency. Thus, auditing your business’s energy efficiency is an essential step in identifying energy conservation and cost reduction opportunities. In this article, you will understand the concept of energy audit and how it can lead to substantial savings on utility bills.

Roadmap to Energy Conservation and Economic Efficiency

When a producer has a high output of energy consumption, it can often be challenging to determine the uses of energy that are the most effective. An energy audit involves the detailed analysis of energy usage and the identification of opportunities for energy conservation. It is essentially inspecting the energy within a building or equipment, calculating the cost of its energy usage, reducing carbon emissions, and promoting ways to safety. 

Given the financial and environmental benefits, energy audits can help businesses identify ways to save money and lead to economic goals. It provides a detailed report of the energy consumption of systems and equipment, including lighting, mechanical devices such as boilers, thermal heaters, energy conversion, equipment, building, etc. Thereby, it offers a number of comprehensive energy solutions that help maximize the business’s energy efficiency. 

Industrial production in India is driven by energy consumption. Studies seem to suggest that the industrial sector consumes 40% of the total energy consumed in India. Subsequently, the energy audit is a key to energy conservation. The primary purpose of an energy audit is to identify existing problems and decide on measures that can be implemented to improve performance. But the foremost step is to determine the type of energy audit that is required for your building or energy-using equipment. The two levels of an energy audit include: 

• Preliminary Audit: Preliminary Audit is the first step to evaluate the company’s business processes, identify the areas needing improvement, and provide Energy Conservation Measures (ECMs). The main objective of this audit is to identify the energy cost and wastages occurring in the major equipment and processes, their operating characteristics, and the energy consumption pattern of a given company. This, in turn, helps the auditor to act upon the areas where improvement is required.

• All-inclusive Detailed Audit: Detailed Audit provides a comprehensive analysis of mechanical and electrical systems, generally through a survey or on-site assessment. The audit results in an energy assessment report that details the efficiency status of building components and quantitative evaluation of ECMs i.e., opportunities for improvement. It is vital since it comes with an in-depth computer-based evaluation and action plan aligned with an organization’s short-term and long-term goals.

As simple as it may sound, it takes high precision technology and advanced tools & software platforms to conduct an energy audit. Furthermore, an inefficient audit may lead to several risks and wastage of energy. Therefore, it is advised to seek professionals delivering services in compliance with the government standards. 

As a leading provider of building and major equipment energy audits, VNT aims at providing a framework for your auditing process. By establishing an appropriate analysis, collecting and compiling preliminary data, and objectively prioritizing and implementing recommended energy solutions, we lay the foundation for your successful audit without compromising efficiency!

Need for Promoting Energy Audit: Leap Forward

Energy consumption is a significant factor in an organization’s sustainability and competitiveness. Energy resources are depleting, and it is essential for organizations to use their energy efficiently. Regardless of the energy inefficiency a business might be facing, energy audit facilities ensure a fully accredited energy performance of your building, plant, or equipment; and providing organizations with an audit report that gives out a comprehensive plan to improve its energy efficiency to reduce cost in the long term. 

Some of the critical factors that call for conservation include:

1. Limited Energy Resources: India accounts for around 16% of world’s population but only 1% of its energy resources. The need to cater to long-term energy requirements makes it essential to utilize the resources efficiently. 

2. Cost Benefits: An efficient use of energy-using equipment through processes such as an energy audit provides utility for a more extended period with low maintenance, which leads to energy saving. Decreasing demands for energy resources impact the overall price to drop and promote economic efficiency.

3. Conducive Environmental Impact: Industrial buildings are likely to emit operational carbon through heating, cooling, and lighting, adding to an organization’s carbon footprint. Energy Audit offsets these emissions and assists the environmental goals of a business. If done efficiently, with the assistance of recognized and reliable service providers, it is an impactful way to achieve emissions reduction targets.

4. Competitive Edge: By auditing buildings or equipment, businesses can not only aid the inefficiency and save energy, but it helps in accomplishing business standards. This, in turn, allows businesses to mark a positive impact and gain a competitive edge over their competitors.

Mandated Energy Audit Regulations

In accordance with the Bureau of Energy Efficiency Regulations (BEE) 2010, It is mandatory for businesses related to engineering, textiles, iron & steel, paper, petrochemicals, and other commercial buildings to conduct an energy audit once every three years. Businesses must opt for assistance from an accredited energy auditing service provider or a team of experienced energy engineers and professionals. 

Involvement of a proper procedure that the government regulates includes:

1. An understanding pattern of energy consumption through utility and electricity bills;
2. Quantitative benchmarking and monitoring in comparison with year-wise trends and other competing industries; 
3. In-depth analysis of equipment’s energy efficiency and optimization to drive maximum utility of energy. 
4. Check on practices followed by the business during operation and maintenance, maximizing energy input requirements.
5. Proposing ways of implementation and effective procedures in compliance with business plans. 
6. Usage of the best tools for an energy audit to reduce an overall impact on environment and lead to economic efficiency, mitigating any inefficiency during the process and after.
7. Most importantly, preparing a comprehensive energy audit report that includes Energy & Utility, operational practices, and energy-saving measures and suggestions.

Although there are a number of benefits to be gained from implementing energy-efficient practices, both economically and environmentally, it can be challenging to decide the areas of improvement and inefficient loophole of a building or an equipment. However, with energy auditors and conservers being as progressive, we can avoid these inefficiencies. 

How can VNT help you to comply with Energy Audit and Management?

An energy audit is a crucial initiative that must be conducted for any commercial building or energy-using equipment. VNT has made it convenient for businesses to investigate, establish and maintain the overall energy system in a time bound manner. Our services include fully-compliant and best practices. With the aim to conserve energy, we take the required measures to improve your business’s energy efficiency and cut costs. Our team of well-trained auditors keep you in track with the updated efficiency measures that can deliver real value to your business. 

We provide energy audits, both preliminary and across-site audits, to analyze the efficiency of equipment and review current energy usage practices. Our consolidated reports highlight your organization with comprehensive ways to reduce annual utility costs, lower business energy consumption, and help in reducing carbon emission as per the government regulations without compromising the efficiency and productivity of the business. 

Lowering the use of energy equipment will not solve the problem of inefficiency while maximizing the productivity of an organization. While the cost of energy-audit implementation might initially seem off-putting, taking into consideration long-term gains, and overall cost benefits, an energy audit is an investment well-worth making within your business. Our aim to recognize energy wastage to a path of energy conservation ensures that our services are reliable and contribute to energy savings and cost-effectiveness. 

It is as crucial and effective for your business as your short-term and long-term business approach. Identify ways for your organization to use less energy, which will effectuate economic gains and help you reduce the environmental impact.
To kick start your green revolution and worthwhile contribution to society, contact us.

Fossil Fuels like coal and petroleum are finite. Our current ways of over-exploitation of our resources have led to their near depletion. With ever-increasing urbanization and population, our energy needs will grow with time, and fossil fuels will not keep up at a similar pace. The ecological and economical solution to this problem is to invest in Solar Rooftops- the most effective way of collecting solar energy. 

The Government of India is taking proactive steps in utilizing Solar Energy. Some institutions and corporations have contributed to the cause – by installing Solar Rooftop Panels in their premises. These institutions serve as an inspiration for all commercial, business and residential societies to embrace Solar Energy for its ample endowments.

Solar Energy in 2021 – Where Do We Stand?

In order to make use of the available Solar energy, solar power collecting systems like Solar Towers, Solar Panels, Solar Tubes, Solar Rooftops, etc are essential.  Among these, Solar Rooftops have emerged as the most feasible way of collecting solar energy. There was some hesitancy amongst people regarding Solar Rooftop Panels, primarily because of the uncertain logistics and limited awareness. However, in recent months, the demand for solar energy has increased – with large institutions leading the way, followed by SMEs and individual homes. The demand for Solar power is further aided because:

• Industries are rapidly striving to achieve normalization in their operations and business processing. 
• Rooftop solar panels promise significant monthly operational cost savings. In the long term, with the rising electricity prices, the savings are expected to be even more significant.
• A greater emphasis on sustainability and reducing reliance on the grid is being placed in 2021. The government, along with the citizens, are proactively taking steps for the same.

Indian citizens are now becoming more aware of the short-term and long-term benefits of Indians employing Solar Energy.

Solar Energy Through Rooftops: Sustainable and Economical

From the moment they are installed, Solar energy provides environmental and financial benefits. It provides numerous short-term benefits – it is boundless, can be stored for future use, reduces the overall carbon footprint, etc. Additionally, it yields even more viable long-term benefits – minimal energy costs, low maintenance, sustainability, amongst many others.

• The Solar Rooftop System has reduced energy costs compared to other fossil fuels, such as petroleum, diesel etc. 
• They are easy to maintain.
• Solar energy has reduced our dependence on oil, gas and electricity. 
• Since an efficient Solar Rooftop System can power a whole house, surplus energy can be stored for the future. It is, therefore, more durable than any other energy source.
• These solar solutions are 100% eco-friendly as they do not emit any dangerous chemical by-products. 

10 Indian Change-Makers Who Installed Rooftop Solar Panels in 2021

At the moment, our country is rapidly embracing renewable energy. India is emerging as a global leader in renewable energy production. To advance closer to sustainable development, the Indian government has committed to installing 175 GW of renewable energy capacity by 2022. The target for solar installations is set at 100 GW.

To date, 23 GW of this target has already been met, with another 40 GW in various stages of implementation. India has become the world’s second-largest producer of solar energy. Now, the nation is on its way to meeting the goals set for the year 2022.

The following institutions are contributing to the cause massively by adopting the Solar Rooftop Panel technology and paving the way for others to follow:

1. The Indian Institute of Management in Indore has installed Solar Panels in 4,600 square meters to generate up to 460 KW of electricity. This solar energy collection method has helped them attain an average energy saving rate of 11.8 percent within six months. The institute head added that IIM Indore would become a net-zero-energy campus within a few years.

2. The Government of Kerala has passed a solar rooftop program to install solar panels on 75,000 residential buildings. With the progress being made on it, the statistics show that by the start of 2022, Kerala will cover up a quarter of its electricity needs with the help of these Solar Rooftop Systems.

3. The UP Government has approved plans to redevelop the city of Ayodhya as a Solar City in 2021. The Government has allocated funds for the installation of Solar Rooftop Panels on government buildings. Additionally, by making amendments to the “2017 Solar Policy”, the UP Government wants to further encourage people to adopt Solar energy, special grants will be given to those who install Solar Panels on their rooftops. These people will also sell the surplus energy generated by their panels to the Uttar Pradesh Power Corporation at the official per-unit fixed rate.

4. The Government in Gujarat has launched a mission to employ the use of Solar PV Rooftop technology. This project is bound to be completed by 2022. The government has decided on a target of 8.024 GW for Gujarat under the National Solar Mission. The rooftop installation of 3.2 GW will be included in this project. 30% of the target has been achieved within 2021’s first quarter.

5. The Government of India has implemented a scheme for setting up Distributed Grid-connected Solar PV rooftop Power Projects in Andaman and Nicobar and Lakshadweep islands. This was launched to make the island carbon-free by reducing the usage of fossil fuels. 

6. The Indian Institute of Science in Malleswaram has installed a 279 KW Solar Panel on three building rooftops to generate energy for the entire institution. They also undertook the project of installing 2200 LED lights to improve energy efficiency in 2020.

7. The Bangalore University of Jnana Bharathi Campus runs entirely on solar power. They faced enormous electricity expenses, so they installed solar rooftop panels to tackle the issue. 

8. The Green School in Bangalore has put up a 5KW Solar Rooftop Panel to meet their energy needs. Since the installation, the school has run on solar power, and electricity has not been used.

9. Samsidh Mount Litera Zee School in Bangalore has set up a Solar Rooftop System of 96 KW, which generates more than 1,15,000 units of electricity per year. Recent reports say that this has reduced more than 7 tons of Carbon Dioxide emission every year.

10. The Delhi Government aims to achieve power independence through solar rooftop panels throughout 2021. They have installed rooftop solar panels in 21 schools so far, with the aim being 500. The Delhi Government further wants to transform Delhi into a Solar-powered city.

Solar Rooftop Panels – Unparalleled Advantages

Individuals and institutions can reap the benefits of Solar Power Systems with proper planning and thorough implementation. These systems are highly adaptable to requirements of   commercial buildings,  residential complexes, educational institutes, etc. 

1. The panels installed on rooftops are of high quality and their constituent parts are reliable. 
2. The quality of these panels has made them resilient against bad weather.
3. The Solar Rooftop System is highly cost-effective. Rooftop solar tariffs are 17% and 27% cheaper than industrial and commercial tariffs, respectively.
4. They have a very low maintenance cost. If maintained properly and with due care, they have a service life of more than 30 years. 
5. The major benefit of this system is the reduction of the carbon footprint. Solar power has low pollution risks. They do not emit any hazardous gases while being used.
6. They are completely eco-friendly.

VNT – Solutions for Efficient Solar Rooftops, one Panel at a Time 

Building on our experience in serving the needs of utility-scale projects, VNT offers second-to-none solutions in the Solar sector. We understand the concerns of durability and efficiency in sustaining strong rooftop systems in commercial and residential buildings. VNT has various Solar solutions ranging from Solar AC Distribution Boxes to LT Metering Panels. One of our most significant achievements includes the “String Combiner Box Manufacturer of the Year-2019” award by Solar-Quarter during the Solar Week-2019. 

The power charges of residential or commercial structures can be reduced substantially by using Solar Panels on the rooftop, hence minimizing the amount of electricity drawn from the power grid. This also implies that the savings will also increase when the cost of grid-supplied power rises in the coming years. VNT can help by providing industry-leading solar solutions.If you would like to see for yourself how VNT India can assist in adopting Solar power in your commercial or residential structures, write to us via email or contact us.

Data is what drives the digital economy. With a transition in business agility from physical to digital, data is the most critical asset of any business organization. With its exceeding significance in India, businesses thus realize how important it is to have well-equipped data centres. Data centres meet the stringent demands of storing large amounts of data in a safe environment. It is critical to investigate options for a modernized data centre with both cloud and physical storage capabilities to maintain a competitive advantage. 

Every business relies on data storage to function; however, it takes a lot of planning and consideration to develop an IT infrastructure-based data centre.  Read on to learn more about how Data centres work in India, why you should invest in one, and how it will change your company’s future.

Decoding the Role of Data centre Security & Management

Whether building a small data centre, or a large cloud hosting platform, it is essential to have a coherent management system. Nowadays, companies focus more on ensuring their data’s safety and privacy by investing in cutting-edge technologies. These include- Artificial Intelligence, blockchain, IoT, Machine Learning, and Big Data Analytics. Hence, the utilization of such massive technologies calls for the growing demands of efficient data centre architecture. As the term “big data” comes into play, there is a considerable shift of focus on data security and management. 

With the vast amount of data, the Indian government has spurred the development of data centres to store data locally. Currently, India’s data centre industry and IT capacity utilization are concentrated in four cities: Mumbai, Delhi, Bangalore, and Chennai. According to JLL research 2021, data centre capacity in India is likely to double by 2023. The accelerating growth in data management is of great utility. Moreover, data security enables security from threats, attacks, and unauthorized access to prevent breaches.

From security to scalability, managing data offers plenty of advantages for digital businesses in India. The primary purpose of data centres include:

1. Data Storage and Backup: Data centres are an integral part of a company’s digital infrastructure, enabling it to store, process, and protect valuable information. Moreover, the equipment sets up an on-site backup server, which in turn recovers the data at the time of uncertainty.

2. Productivity Applications: E-mail management and networking have become convenient for businesses. Data centres provide a framework for automated emails, file sharing and a heavy volume of e-commerce transactions.

3. Web Hosting: Data centres influence the functioning of web content offsite, generating backup support and thereby reducing the overall physical footprint. The stored data is accessible to multiple users as per the business requirements. 

4. Automated Protection: Data centres provide a computerized system for operating and maintaining data across several physical, digital and multi-cloud environments. It has a range of connectivity options, including backup power sources, redundant cooling systems, and controlled access. 

5. Powering online gaming: The possibilities of technological growth seem endless. Apart from web hosting and video streaming, data centres are utilized for hosting low latency applications such as online gaming.  

As digitization moves forward to encompass all aspects of businesses, India’s need for data centres will grow. Furthermore, with the data consumption rate growing exponentially, our macro interest is in innovative technologies for data centres. However, innovation alone is not sufficient. The efficiency of any data centre depends upon the maintenance during its lifetime as much as on an operational level. 

Data centre Architecture: Critical Components

Data centres have their roots in the computer rooms of the early ages of the computing industry. The large-scale computing systems are used to gather around centralized mainframes in rooms with raised floors to reduce cable congestion and increase cooling capacity. Likewise, India’s data centres are evolving with the growing reliance on digital technology, IoT-connected devices, and cloud adoption.

Essentially, a data centre is used to house computer systems and associated components, such as telecommunication, solar and other storage systems. Moreover, it generally includes redundant or backup power supplies, data communications connections, environmental controls (e.g., air conditioning, fire suppression), and various security devices. The crucial components of data centres in India include:

1. Air-Cooling Equipment: This data centre component protects assets by real-time monitoring of relative humidity and temperature. It takes readings of the environment and air pressure and proper temperature at all times. This, in turn, curbs the hot spots or varying temperatures within the facility.

2. Server Racks: The physical support in each data centre is provided by an advanced shelf or server racks. It houses the necessary equipment, including servers, routers, switches, telephone equipment, and much more. This ensures data security and enables smooth operations of a business.

3. Electrical Power Equipment: Business continuity can only be maintained by having a regulated power system. Power surges or interruptions often lead to extensive downtime and real-time business loss. Therefore, data centres must have battery banks and regulated power systems to prevent single points of failure. 

4. Cable Management Supplies: Cable trays help organize cables and prevent them from obstructing access and viewing the device’s front. Additionally, properly organized wiring can also prevent damage, thereby extending the life of the cable.

5. Fire Suppression & Security: While heat is a significant concern for the valuable assets of any business organization, suppression systems prevent fire during faults. As a result, valuable assets are protected against fire hazards with proper fire suppression and security equipment.  

Businesses in India must extensively secure data centres against hazards such as extreme temperatures, fire, electrical faults, surges, etc. Given the benefits of these components, it is imperative to keep the system and equipment up-to-date and must be maintained or replaced every 3-5 years. However, some of these components need regular inspections that require daily, weekly, and monthly check-ins.

Delivering Data centre Solutions at VNT

The efficiency of any data centre seeks efficient installation and maintenance after. With VNT at your service, we install and maintain network resources, ensure data centre security, and monitor systems that take care of power and cooling. Similarly, our services comply with organizational standards and certifications for data centre operations. 

Regardless of the data center’s size, our team of professional engineers and technicians work closely with businesses to ensure existing equipment’s safety, availability, and performance. We ensure data management and control over physical access and environmental systems that house critical data systems and hardware. Consequently, we provide compactly designed and automated fire suppression systems and other telecommunication solutions working with specific business requirements. 

Abiding by international standards, our fire safety and power systems act robustly, helping businesses focus on core management activities. At VNT, we are committed to enabling efficient, reliable and high-performance solutions using best practices to maintain the potential of a data centre. Considering the maintenance of the physical infrastructure, we detect and defend any vulnerabilities of your equipment beforehand.

To transform your business digitally by achieving seamless business operations and comprehensive solutions, contact us.